Inspections & Forms

Build your own forms and inspections, have crews fill them on the phone or the web, and see what's due and what's missing.

Copy page for AIUpdated November 21, 2026
Watch: A tour of the Forms page (44 seconds)8 videos

Paper checklists get lost in truck cabs, and nobody notices a missed inspection until something breaks. At Acme Precision, drivers fill in the Vehicle pre-trip inspection on their phones before a truck leaves the yard, and the office sees every answer, every failed check and every form that wasn't done.

Add it from the Marketplace

What it does

Inspections & Forms lets you build your own inspections, checklists, daily reports and other forms without code. Crews fill them in on the web or in the DV Field phone app, with photos, signatures and voice, or on paper that the AI reads for you. Each form is a draft while it is being filled in, and read only once it is submitted.

The module adds these pages under Inspections & Forms in the sidebar:

  • Forms: where people fill in forms. Tiles count what is Due, Overdue, Your drafts and Forms to start. The Due list shows scheduled forms, the Start a form tab has a card for each published form, and Your forms holds your drafts and what you submitted.
  • Submissions: everything collected on every form, with tiles for Submissions, Submitted and Drafts, and Export CSV.
  • Due & missing: every scheduled form in a date range, and whether it was done, started or missed.
  • Mobile app: the DV Field download link, a QR code and a message to send your crews.
  • Form builder: build, publish, schedule and archive forms. Each form has three tabs: Design the form, Settings and Schedules.

Which pages you see depends on your permissions: someone who only fills in forms sees Forms and Mobile app.

Set it up

A Workspace Admin does this first.

  1. Give each role the permissions it needs (see Users and roles: create and edit roles): crews Fill in forms, office staff See and export every submission, one or two people Build and publish forms, and Scan paper forms for whoever types up paper forms today.
  2. Open Module Settings from the ⋮ on the Inspections & Forms sidebar row, then Preferences. Set the work days (Mon to Fri unless you change it), the crews' time zone, how many days back the phone shows overdue forms (14), and the AI models for the section mic and for scanned paper. See Module settings and versions.
  3. If you want voice fill or paper scanning, make sure your workspace has AI set up.
  4. Build and publish your forms in Form builder (see below).
  5. Put forms that recur on a schedule, so they come due for the right people.
  6. Send crew leads the DV Field app from the Mobile app page.

Fill in a form on the web

  1. Open Inspections & Forms → Forms.
  2. If the form is due, click its row under Due. Otherwise click the Start a form tab and click Start on the form's card.
  3. If the card at the top asks where to log it (Log to or Project), pick a project or internal account from the list, where your recent picks come first, or search for one.
  4. Answer the questions. On a photo field click Add photos; on a signature field, sign in Sign here and type the signer's name.
  5. To fill a section by talking, click the mic on the section's header, click Talk (or type what was done) and click Fill section. Check the fields marked AI filled — review; Undo puts the section back.
  6. Click Submit and confirm. If it lists what is missing, fill that in and submit again.

The form saves itself as you go. To finish later, open the Your forms tab, click Drafts and click the draft. Delete draft throws away one you started by mistake.

Fill in forms on the phone

Crews use the DV Field app (Android).

  1. On Today, tap a form under Due, a draft under Finish, or a tile under Start. All forms lists the rest; tap the star to pin one to Start.
  2. A form with Labor or Materials asks Which project? first.
  3. Fill in each section. In Labor tap Same crew as last time or + Add labor, and set Reg, OT and DT or tap 4 h, 8 h or 10 h. Tap Take photos for photos and sign at Sign here.
  4. Tap Save draft to finish later, or Submit and confirm. If it says Almost there, fill in the sections shown in red.

Post time and Post materials tiles log a crew's hours or materials on a project or internal account without a full daily. Hold Ask DV Field and say what you want, for example "New daily log for Oak Hollow" or "Post 8 hours for Sam today"; it fills in what you said and asks about anything it isn't sure of. Nothing is submitted until you tap Submit.

Inspect a truck or machine by scanning its QR label

  1. In Form builder, open the inspection and click Settings. Under Start by scanning:, pick the list, for example Equipment & Tools → Equipment.
  2. On Design the form, add the ready-made Equipment hours, Problems found and Equipment photos sections if you want them, then click Publish.
  3. On the phone, tap the inspection. The camera opens: scan the unit's QR label, or tap Type it instead. The About card shows its hours, maintenance due and open repairs; tap Scan again if it is the wrong unit.
  4. Answer the checks, enter the meter reading, add any Problems found, sign and tap Submit. Problems open repairs in Equipment & Tools.

Turn scanned paper forms into submissions

  1. On Forms, click the Start a form tab and click Paper on the form's card. Pick the PDF or photos: each page is one filled-in copy, up to 60 pages and 25 MB.
  2. Wait for the first page, or click Close and come back later under Your forms → Drafts.
  3. Check the page beside its scan. The fields listed under Check these were the ones the AI was unsure of. Scanned pages fill tables too, such as Manpower and the Labor, Material and Equipment lines. When a written name only comes close to an item on your lists, the closest item is picked and flagged for you to check.
  4. Click Approve & next (Approve on the last page). Type in any page marked Not read by hand.
  5. To throw away a wrong upload, click Delete this upload and confirm.

The Paper button shows for people with both Scan paper forms and Fill in forms.

If your paper calls things by other names than your lists do ("Carpenter Foreman" for the role General Foreman), write those translations in scan_reader_notes under Module Settings → Preferences. Every scanned page is read with them.

Review submitted forms

  1. Open Submissions. Pick a form in the list at the top (or leave All forms), and click Submitted to leave out drafts.
  2. Click a row to read it: its details, answers, photos and signature. History at the bottom shows when it was submitted and every change since.
  3. Click Print / PDF for a paper copy.
  4. If it needs fixing, click Reopen for changes and confirm. It goes back to a draft until it is submitted again, and anything it posted to Accounting or Equipment & Tools is taken back until then. Tell the person what to fix.
  5. To delete submissions, tick them and click Actions → Delete…, then confirm. This can't be undone.

Find past forms and export them

  1. On Submissions, pick the form, or click Log on its card on Forms.
  2. Click All, Submitted or Drafts, and type in Search form, what it is about, who…. Click a column heading to sort, and Columns to hide or move columns.
  3. Click Export CSV to download everything listed: one row per submission, one column per question. Photos export as a count.
  4. Or tick rows and click Actions → Export answers to CSV.

See what is due and chase what is missing

  1. Open Due & missing and set Scheduled for (up to 93 days, ending today at the latest).
  2. Click Not done or Overdue, or the Overdue or Missing tile. Search with Search form, project, person….
  3. Click a started row to open the draft.
  4. Who says who is responsible. A no lead tag means the record has no lead with a login, so nobody is reminded.
  5. Tick rows and click Actions → Export selected to CSV to send the list on.

Build and publish a form

  1. Open Form builder and click New form. Type the Name, pick the Kind (inspection, form or survey), pick A blank form or a copy of another, and click Build it.
  2. On Design the form, click a field type on the left, for example Yes / No, Pass / Fail / N/A, Photos, Signature, Lookup or Table. It is added to the form in the middle, and its settings (label, required, choices) open on the right.
  3. Click New section, or a layout such as Two columns, to group fields. Under Ready-made sections, add sections other modules offer, such as Labor or Materials.
  4. Click Phone above the form to see it as crews will in DV Field.
  5. On Settings, fill in the Name, Kind, Category and Description. If the form has Labor or Materials, tick Projects and/or Internal accounts under Logged to:.
  6. Click Try it out to fill it in yourself; nothing there is saved.
  7. Click Save draft to keep working later, or Publish and confirm.

Each publish is a new version. Answers already collected keep the version they were filled in on, so changing a form never changes them.

Choose how a form works on the phone and after it is sent

On the form's Settings tab in Form builder:

  • Quick action on the phone puts the form on DV Field's Today screen as a one-tap tile. Under For:, tick the roles that get it; none ticked means everyone who fills in forms. This is how Post time and Post materials reach crews.
  • Start by scanning: opens the phone's camera first, so the form is about the unit whose QR label was scanned.
  • Changes after submitting lets the person who submitted a form click Edit, change it and click Submit changes. Each change, who made it and when, is kept in the form's History. Under Tell when it's changed, tick who should be notified.

Click Publish for the changes to reach people. Pull down on Today in DV Field to see a new tile.

Put a form on a schedule

  1. Open the form in Form builder, click the Schedules tab, then Add schedule. The form must be published first.
  2. Give it a Name. Under About, pick Every record of…, One record of… or Nothing in particular, and the list it covers, such as every project or every piece of equipment.
  3. Pick How often (every workday, every day, weekly, monthly, every N days, or when needed) and Due within (days).
  4. Under Who, pick The record's lead (e.g. the project's crew lead), Everyone with a role… or A person….
  5. Leave Status on Active and click Save schedule.

To pause, resume or delete schedules, tick them and use Actions. What was filled in stays.

Retire, restore or delete a form

  1. In Form builder, click In use, Published, Not published, Archived or All, and search with Search forms, categories….
  2. Click the … on the form's row and click Archive (no new submissions), or open the form and click Archive. Nobody can start it, and everything collected stays.
  3. To bring one back, click Archived, then … → Restore.
  4. A form nobody has filled in can be deleted: … → Delete, and confirm.

For several forms, tick them and use Actions.

Get the DV Field app to your crews

  1. Open Mobile app. The card shows the Android version and the share link.
  2. Click Copy message and paste the ready-made text into a text or email, or click Email it or Copy link. A crew lead can also scan the QR code.
  3. On the phone, the crew lead opens the link, signs in and taps Download the app, then installs it.
  4. In DV Field they sign in and pick your company under Choose a workspace. The app updates itself after that.

Who can do what

Each action in the module needs a permission. A Workspace Admin gives permissions to roles; see Users and roles: create and edit roles. Out of the box shows the module's starting roles that have it.

PermissionWhat it lets someone doOut of the box
Fill in formsFill in and submit published forms on the web and the phone app, and see only their own submissions. Also needed to download the DV Field app.Admin, Operator
See and export every submissionSee every submission from everyone, export answers, watch Due & missing, and run form reports.Admin, Operator, Viewer
Build and publish formsBuild, publish, schedule, archive and delete forms, set phone tiles, and reopen or delete anyone's submissions. Give with care.Admin
Scan paper formsUpload scanned paper forms, have the AI fill a draft from each page, and check and approve those drafts.Admin
Manage settingsChange the module's preferences: work days, time zone, overdue days, AI models, and what forms are logged to by default.Admin
  • Opening Module Settings needs the platform's settings permission, which administrators have.
  • Seeing the hours and materials on a form never shows dollars. Costs stay in Accounting.

Ask its agent

The Forms Assistant (the robot in the module header) answers from your own forms and has exactly your permissions. Try:

  • "How many Vehicle pre-trip inspections were submitted last week?"
  • "Which checks failed on TRU-001's latest pre-trip inspection?"
  • "Add a Yes / No question for the fire extinguisher to the Vehicle pre-trip inspection."

It says what it will do and waits for your yes before it submits, reopens, changes a form or saves a schedule. See Agent chat.

Good to know

  • A daily report records the day's work. It is not a bill: the Labor, Materials and Equipment sections post job cost to Accounting, priced there, and crews never see the dollars.
  • A form started from Due is already about its project or unit and date, and starts with the previous one's crew.
  • Forms need a connection to save on the phone. DV Field is for Android; on an iPhone, fill in forms in the phone's web browser.
  • Voice fill and paper scanning use your workspace's AI. You always review what it filled before you submit.
  • Every list has a Columns button. Your layout is saved for you and changes nobody else's.

More help

Open the module's Help (the book button at the top of each page) for the full reference, and its Runbooks for step-by-step guides, from installing DV Field and filing a daily on the phone to scanning paper, chasing missing forms and scheduling a form. See Find and follow a runbook. To chart submissions, see Dashboard. Inspections & Forms works with Accounting for job cost, Equipment & Tools for QR inspections and repairs, and Price Book & Vendors for materials.

Can't find what you need? Contact support.