Assets

Keep every machine, device and asset in one list, with its specs, classification, documents and full history.

Copy page for AIUpdated November 21, 2026
Watch: A tour of Assets (43 seconds)8 videos

When the details of a machine live in a binder and its repair history lives in someone's inbox, nobody has the whole story. At Acme Precision, every mill, lathe, forklift and server is in Assets, so a technician can look up the lathe's serial number, its specs and every work order raised on it in one place.

Add it from the Marketplace

What it does

Assets is your workspace's one list of equipment: machines, motors, pumps, vehicles, computers, network gear, software and production lines. Other modules, such as Work Orders, link to these assets instead of keeping their own copy. Workspaces that keep people's access records here have Person Records too.

Assets in the sidebar opens the list:

  • Counts at the top: Total Assets, Critical, In Maintenance and Active. They always count every asset.
  • A table of every asset with its photo, Code, Name, Classification, Type, Location, Criticality, Status and Serial.
  • A search box, filters for classification, type, status and criticality, New, and Help.

Click an asset to open it in a side panel. It has these sections: Identity, Classification, Manufacturer, Notes, Attributes (its specs), Nameplate, Images, Documents and Event History.

Every asset sits on one classification, from a two-level tree: Commercial (with Endpoints, People and Other) and Unclassified out of the box. Workspaces that use Reg Compliance's CUI scope also get a CUI Enclave branch.

Set it up

A Workspace Admin does this first.

  1. Open Module Settings from the ⋮ on the Assets sidebar row, and go to Configuration. See Module settings and versions.
  2. Review the Classification tree. Add your own classifications under Commercial (pick the parent in Under), and tick Intune devices on the row where new devices from Microsoft Intune should land. Click Save on the list.
  3. Review Asset Types. In each type's Attribute template, write one spec per line: just the name, or the name, a bar and the unit (for example Voltage | V). Click Save.
  4. Rename Criticality and Status values if your team uses other words. The four built-in values in each can't be removed.
  5. Under Locations, click Add location and build your sites, buildings, rooms and racks. Use Sub on a row to add a place inside it.
  6. On Preferences, decide whether nameplate photos are read with AI (nameplate_analysis_enabled, on by default) and, if you like, which model reads them. Reading nameplates needs the workspace's AI to be set up.
  7. Give the permissions to your own roles, such as Maintenance Planner or Technician. Out of the box, Viewers look, Operators add and edit, and only Admins delete. See Users and roles: create and edit roles.
  8. On Assets, click New for each asset.

Find an asset

  1. Open Assets from the sidebar.
  2. Type part of a code or name in Filter by code or name….
  3. To narrow the list, pick from All classifications, All types, All statuses or All criticalities.
  4. Click a row to open the asset.

Add an asset

  1. On Assets, click New.
  2. Fill in Asset code (for example PUMP-101) and Name. Both are required, and the code can't be changed later, because work orders refer to it.
  3. Pick the Type, Location and a Position such as a rack slot, and add a Location detail if the tree doesn't say enough.
  4. Set the Criticality and Status.
  5. Under Manufacturer, fill in the Manufacturer, Model, Serial number and Install date if you have them, and add Notes.
  6. Optionally pick photos under Images. The first becomes the default photo.
  7. Click Create.

A new asset starts as Unclassified (a person record starts under People). Open it to set its classification, specs, nameplate and documents.

Update an asset

  1. Click the asset in the list.
  2. Change any field under Identity, Classification, Manufacturer or Notes.
  3. Click Save changes. Close leaves without saving.

Attributes and Nameplate have their own save buttons. Photos and documents save as soon as you add them.

Sort assets into classifications

  1. Open the asset and pick Asset classification under Classification. Click Save changes.
  2. To classify many at once, tick them in the list, click Actions and pick a classification under Classify as.
  3. To see one branch, pick it in All classifications.

The CUI Enclave branch belongs to Reg Compliance. You can't move an asset into it from Assets. An enclave asset shows (set by Reg Compliance) and a box with its system, category, CUI interaction and scope. To take enclave assets out by hand, tick them, click Actions, pick Remove from CUI Enclave… and type Remove to confirm. Each goes back to Unclassified (or People for a person record), and its history records who did it.

Record specs, nameplates and photos

  1. Open the asset. Under Attributes, fill in the values. Picking a Type adds the specs that type expects; Add attribute adds your own, with an Attribute, Value and Unit.
  2. Click Save attributes. It saves the whole set.
  3. Under Nameplate, click Capture and pick a photo of the data plate. When nameplate analysis is on, the manufacturer, model, serial number and ratings are read from it and listed.
  4. Check and correct the fields, then click Save fields. Nothing is kept until you do. Add photo adds another plate, Analyze again reads them all together, and Add field lets you type one yourself.
  5. Under Images, pick photos to upload (PNG, JPEG, WebP or GIF, up to 10 MB each). Click Set default on the one to show in the list, and type in + tag to label a photo.

Keep documents on an asset or Person Record

  1. Open the asset or Person Record and go to Documents.
  2. Type a Title, such as Signed MFA acknowledgment, then pick the file (up to 25 MB). It uploads straight away.
  3. Click a document to open it.

On a Person Record, Work Orders files the signed forms here when one is attached to an approval.

See an asset's history

  1. Open the asset.
  2. Click Event History near the bottom of the panel.

Each line shows when it happened, what kind of event it was and what happened. Other modules add their events by themselves: Work Orders when a job is opened on the asset, Reg Compliance when it classifies an asset, and the Intune sync when it adds a device.

Change many assets at once

  1. On Assets, tick the assets. The box in the header ticks only the ones shown.
  2. Click Actions.
  3. Pick Mark active, Mark in maintenance, Retire, a classification under Classify as, Remove from CUI Enclave… or Delete permanently….

The message says how many changed, and the first reason any failed. Clear drops the selection.

Retire or delete an asset

  1. Open the asset and scroll to the bottom of the panel.
  2. Click Retire asset for equipment you no longer use. Its status becomes retired, and the record, its history and linked work orders are kept.
  3. Only for a mistake, such as a duplicate, click Delete permanently and type Delete. It removes the asset with its photos, nameplate, attributes, documents and history, and can't be undone.

Sync devices from Microsoft Intune

  1. A Workspace Admin connects the workspace's Microsoft 365 integration and grants Devices (Intune) to Assets in System Settings → Integrations.
  2. Turn on the Sync devices from Intune schedule. It runs each morning.
  3. In the Classification tree, tick Intune devices on the row where new devices should land (Commercial › Endpoints out of the box).

A device is matched to an asset by its Intune id, then by serial number. A matched asset gets its OS, primary user, compliance, last check-in, memory and storage as attributes, and an empty manufacturer, model or serial number is filled in. Nothing typed by hand is overwritten. A device with no match becomes a new active asset, with a history event. A device Intune no longer lists is reported, never retired.

Who can do what

Each action in the module needs a permission. A Workspace Admin gives permissions to roles; see Users and roles: create and edit roles. Out of the box shows the module's starting roles that have it.

PermissionWhat it lets someone doOut of the box
View assetsSee the asset list and each asset's details, classification, attributes, nameplate, photos and documents, and the location tree; other modules' rules can read people and assets on their behalf.Admin, Operator, Viewer
Add and edit assetsCreate, change, retire and classify assets, alone or many at once; edit attributes and nameplate fields; upload documents; edit the classification, type, criticality and status lists and add or change locations; run the Intune device sync.Admin, Operator
Delete assetsPermanently delete assets with all their photos, attributes, documents and history; delete documents and locations; take assets out of the CUI Enclave. Give with care.Admin
View asset historyRead the Event History timeline on each asset.Admin, Operator, Viewer
Add to asset historyAdd an event to an asset's history. No screen has a button for this; other modules add their events without it.Admin, Operator
Manage asset photosUpload, tag, set the default for and delete asset photos, and capture, read again with AI or remove nameplate photos.Admin, Operator

Good to know

  • Retire rather than delete. Other modules refer to assets, so deleting one removes its history from their story too.
  • Locations can't be deleted while sub-locations or assets still use them.
  • If the list says The asset list could not be loaded, the server didn't answer. Click Try again.
  • If nameplate reading says an AI key is missing, the workspace's AI isn't set up yet. You can still type the fields with Add field.
  • Other modules can use your Person Records and assets in their own rules, such as Work Orders deciding who must sign off on a request.
  • Assets, asset history and asset documents are available for reports and dashboards. See Dashboard.
  • Assets has no assistant of its own. In the workspace's AI chat, someone who manages photos can have a nameplate photo read, and someone who adds and edits assets can run the Intune sync or a dry run first.

More help

Click Help at the top right of the asset list for the full reference: Overview, Fields and lists, Who can do what, Questions and, for administrators, Setup. Assets has no runbooks yet. See Find and follow a runbook for modules that have them.

Can't find what you need? Contact support.