Camera Vision NVR

Connect a site PC, add your IP cameras, choose who may watch each one, then watch live, play back recordings, and save and share clips.

Copy page for AIUpdated November 21, 2026
Watch: A tour of Camera Vision NVR (52 seconds)7 videos

Camera Vision NVR turns the IP cameras already on a site, and a PC's own webcam, into a video recorder you run from Data Visions. At Acme Precision, the plant manager can check the loading dock live from home, and the office can pull a clip of last night's delivery without driving to the site.

Add it from the Marketplace

What it does

A PC at the site records every camera and copies the recordings to your workspace. Recording carries on when the internet is down. Each person sees only the cameras they were given. The module has these tabs:

  • Cameras: each site's cameras, or for most people the cameras they were given.
  • Live: the cameras you may watch, one at a time or in a grid.
  • Playback: a calendar and timeline of each camera's recordings, with a picture of every minute.
  • People seen: people found on cameras with detection switched on, and who came in or went out through a door.
  • Clips: saved clips you can play, download or share.
  • Settings (managers only): Recording & limits, Usage, Detection, Who may watch, Recognition and Install.

Set it up

A Workspace Admin does this first. You need a Windows PC at the site that stays on, on the same network as the cameras, with enough disk space.

  1. Add the module from the Marketplace.
  2. Go to System Settings → Bridges and click Download Bridge Harness. Choose how many PCs and for how many days the file may be used, and click Download setup file. Run it on the site PC and allow it administrator rights, then delete the file. See Bridges.
  3. In System Settings → Bridges → Computers, find the PC and click Install next to Camera Vision NVR connector. Within a minute or two the PC appears in the module under Site at the top right, marked Online.
  4. In the module, open Cameras and click Scan for devices. If some cameras are on another network behind a router, type those networks in Also scan these networks first.
  5. Under Found, not added yet, click Add on each camera you want. Click Sign in on each one; leave the boxes empty to try the maker's factory login, or type the camera's username and password. A camera the scan missed can be added with Add camera and its address, and many at once with Import list (a CSV file).
  6. Click Edit on each camera to give it a Name and an Area, and to choose whether it records, what is sent to your workspace (every minute, only minutes with motion, or nothing) and its detection (off, motion, or people and faces). Click Save. To change several cameras at once, tick them and click Change ticked.
  7. Open Settings → Recording & limits. Set how many days to keep on the PC, the space it may use, and the upload speed by day and by night. Click Save. Usage then shows whether uploads keep up.
  8. Open Settings → Who may watch and give cameras or areas to roles or people (see below).
  9. To change how long your workspace keeps recordings (30 days by default), open Module Settings from the ⋮ on the module's sidebar row.

For a PC that should run only the camera recorder, use the separate Video Bridge instead of the Bridge Harness: open Settings → Install, click Download the certificate and Download the Video Bridge, install both on the site PC, and sign it in to your workspace. Then approve it in System Settings → Bridges. (The Install page calls this place Admin → Bridges; it is System Settings → Bridges.)

Choose who may watch

  1. Open Settings → Who may watch.
  2. Under Cameras and areas, tick one or more cameras, or an area to cover every camera in it.
  3. Under Give to, choose a role or a person.
  4. Click Give access. To take it back, click Remove on that line.

Someone with only the view permission sees nothing until you give them cameras. People without access do not see that camera anywhere, including its recordings and clips.

Watch live and play back

  1. Open Live. Pick a layout of 1, 2×2, 3×3 or 4×4 at the top right; with more cameras than tiles, use the page arrows.
  2. Click a tile to open that camera full size. Choose Full size or Small stream, and Close when done. The full-screen button at the top left of a video fills the screen; press Esc to come back.
  3. To look back a few minutes, point at a live tile and click the rewind button at its top right. Playback opens on that camera three minutes earlier.
  4. To find an older recording, open Playback and tick up to nine cameras on the left (type in Find a camera or area to narrow the list). They all play together on one clock.
  5. Click the date button and pick a day; days with recordings have a dot. The arrows beside it step a day, and Today comes back.
  6. Point at the timeline to see a picture of that minute, and click to play from there. 24 h, 6 h and 1 h zoom the timeline, and Go to time jumps to a time you type.
  7. To find a moment by eye, look through Pictures this hour under the timeline and click the picture you want.
  8. Use −1m, −10s, +10s and +1m to step, and 1×, 2×, 4× or 8× to change speed.
  9. On cameras with detection on, tick Motion only to skip the quiet stretches, and Boxes to outline each person and face.

Review people seen

  1. Open People seen and pick the day.
  2. Pick a camera instead of All cameras, choose Door crossings, Came in or Went out instead of Everyone, or tick With a face.
  3. Click a person's card to play that moment.

Only cameras with detection switched on find people, and door crossings need a door line drawn on the camera's Edit screen under Sensitivity and door line.

Save and share a clip

  1. In Playback, click the camera's tile to focus it and move to where the clip starts.
  2. Click Mark clip start, move to where it ends, and click Mark clip end. A clip can be up to 30 minutes long.
  3. Type a Name, add a Note if you like, and click Save clip. The site PC must be online.
  4. Open Clips and type in Search clips to find it. It shows Saving… and then Ready.
  5. Use the icon buttons on its row: Play, Open in Playback, Download MP4, Share a link or Delete.
  6. For Share a link, choose how long the link works for under Link works for (1 hour, 1 day, 3 days or 7 days) and click Create link. The link is copied for you.

Who can do what

Each action in the module needs a permission. A Workspace Admin gives permissions to roles; see Users and roles: create and edit roles. Out of the box shows the module's starting roles that have it.

PermissionWhat it lets someone doOut of the box
Watch assigned camerasWatch live and play back the cameras and areas given to them, see People seen for those cameras, and save, download, share and delete their own clips. Shows nothing until a manager gives access.Admin, Operator, Viewer
Watch every cameraWatch every camera, without being given each one. Give with care.Admin
Set up camerasAdd, sign in to, name, configure and remove cameras; set site recording and upload limits; choose who may watch; switch face recognition on or off and name people; move a removed camera's recordings; delete anyone's clip. Also sees every camera. Give with care.Admin

Good to know

  • Camera passwords stay on the site PC. Your workspace never receives them.
  • The site PC never deletes a recording before your workspace has it, unless its drive would otherwise fill up.
  • Clips are kept until someone deletes them. A shared link opens that one clip only.
  • Detection of people and faces needs a graphics card in the site PC; without one it finds motion only.
  • Naming people from their faces is off by default. Someone with Set up cameras switches it on in Settings → Recognition, after recording where the people concerned were told and how they agreed. Switch off and delete all face data turns it off and removes every face print.
  • Open Camera Vision NVR in the site PC's tray opens a local app that works offline.

More help

Open the module's Help for the full reference, including how much disk space recording needs. Its Runbooks walk through each job step by step: setting up a site PC, installing the separate Video Bridge, finding and adding cameras, importing a camera list, setting recording and detection, setting upload limits, giving access, watching live, finding a recording, saving and sharing a clip, reviewing people seen, and fixing a camera that is not working. Camera Vision NVR relies on the Bridge Harness on a site PC; see Bridges.

Can't find what you need? Contact support.