Accounting

See what every job costs and earns, bill time and materials, and send invoices to QuickBooks.

Copy page for AIUpdated November 21, 2026
Watch: A tour of the Accounting dashboard (50 seconds)10 videos

When hours sit on paper dailies and receipts sit in a truck, nobody knows what a job made until the month is closed. At Acme Precision, each crew lead's daily posts the hours and materials to the job as it is submitted, priced at the right rates. The office adds the receipts and bills, sees each project's profit, and turns the work into invoices for QuickBooks Online.

Add it from the Marketplace

What it does

Accounting is job costing. Every labor, material, equipment and cost line is charged to a project, or to an internal account for overhead, under a cost code. Labor is priced as it posts, from the rate sheet in effect on the work date. Crews post their hours on forms and never see a dollar.

The module adds these pages under Accounting in the sidebar:

  • Dashboard: This week and This month tiles for Labor hours, Cost, Billable and Margin on billed work, each compared with the period before. Needs the office appears when there is Labor not priced, Materials & equipment to cost or Hours posted twice?. Below are the Trends charts, Projects this month, Go to links and a Set up line.
  • Projects: every project's customer, hours, cost, billable, revenue, gross profit and margin. Click one for its profit and loss. The Internal accounts tab shows overhead by department.
  • Transactions: every line, with Add cost, the line's details and receipt, and Export CSV.
  • T&M Billing: the T&M Billing Summary of what a project's time-and-materials work bills for a period, ready to print.
  • Invoices: the Invoiced tab (every invoice by status) and the Unbilled tab (work not on an invoice yet), with Bill service contracts, New progress invoice and Export to QuickBooks….
  • Bill rates: what each labor role bills at, for crew leads. It never shows wages or cost.
  • Reports: the ready-made Job cost by project report.

Projects, customers and crews come from the module your workspace uses for them. Employees and labor roles can come from HR, and products and vendors from the Price Book.

Set it up

A Workspace Admin does this first.

  1. Give each role the Accounting permissions it needs (see Who can do what below). Only Admin gets the dollar permissions out of the box. See Users and roles: create and edit roles.
  2. Open Module Settings from the ⋮ on the Accounting sidebar row. On Configuration → Labor rates, check the Company multipliers and click Edit defaults to change them. They start at overtime ×1.35, double time ×1.7 and burden ×1. See Module settings and versions.
  3. Click Add labor role for each role your crews work as, such as Foreman or Laborer. If your workspace uses HR, roles are added there instead.
  4. Click New standard rate sheet, then type each role's Bill (T&M), Work-in-scope premium and Burdened cost, and click Save rates. Until a standard sheet exists, labor posts its hours but is not priced.
  5. On Cost codes, check the starting codes and type each one's QuickBooks name so exports match QuickBooks.
  6. On Internal accounts, click Add internal account for each overhead account, such as Shop / Yard, Training or Drive time.
  7. On Preferences, type the T&M markups, profit and overhead, bond and sales tax percents, the invoice prefix and next number, days until due and retainage, then click Save Settings.
  8. Set your logo and letterhead in System Settings → Branding, so summaries and invoices print on it.
  9. In Inspections & Forms, add the Labor, Materials and Equipment sections to the forms crews use.

The Dashboard's Set up line counts your cost codes, labor roles, rate sheets and surcharges, and warns when labor can't be priced yet.

Check what the crews' forms posted

  1. Open Accounting → Dashboard.
  2. Look under Needs the office for Labor not priced, Materials & equipment to cost and Hours posted twice?.
  3. Click a tile to open just those lines on Transactions.
  4. Fix each one, then click Show everything to see every line again.

Add a receipt, card purchase or rental

  1. Click Add cost (on the Dashboard, Transactions or a project's P&L) and leave it on One amount.
  2. In Charged to, pick a project or Internal account (overhead), then choose it in Which one.
  3. Set the Date, Paid by (Card, On account, Cash or Other) and Vendor. Leave Bills as on As the project bills unless this cost bills differently.
  4. Type What, pick the Cost code and type Amount (cost). Add Qty and Unit if they help. Leave Bill to customer empty to bill at the usual markup.
  5. Choose the file under Receipt or bill (photo or PDF) and click Save cost.

Enter a vendor or subcontractor invoice

  1. Click Add cost, then Vendor invoice (lines).
  2. Pick the project in Charged to and Which one, and set the Invoice date, Vendor, Paid by and Invoice #.
  3. For a subcontractor, set Cost code for lines without an item to your Subcontractors code.
  4. On each row, pick a Price Book item or type what it is, with quantity, unit and unit cost. Type Bill only for a set bill amount. Click Add line for another row.
  5. Attach the file under The invoice (photo or PDF) and click Save cost. Each line is costed and billed on its own.

Cost a material or rental a crew posted

When a daily posts a typed material or rental as a quantity only, the office enters what it cost.

  1. Click the Materials & equipment to cost tile on the Dashboard, or find the line on Transactions.
  2. Click Cost it (the $ button) on the line. The Cost this material (or Cost this equipment) form opens filled in.
  3. Type Amount (cost), and pick Paid by and Vendor. Leave Bill to customer empty to bill at the markup.
  4. Attach the Receipt or bill (photo or PDF) and click Save cost.

Find and check lines

  1. Open Accounting → Transactions. It shows the last 30 days.
  2. Type in the search box to find a project, employee, material, vendor or code, and set the dates.
  3. Click Labor, Material, Equipment, Cost or Surcharge to show one kind, or All.
  4. Click the eye (View line) to see who, hours, role, rate sheet, cost and billable. Click Open the form to read the form it came from, or Receipt to see the receipt.
  5. Click Export CSV to download the list, or tick rows and pick Actions → Export selected to CSV.

Fix a wrong line

Nothing is edited or deleted. A wrong line is reversed, and the right one entered again.

  1. Find the line and check it with the eye (View line).
  2. Click Reverse (the undo arrow) and confirm. For several lines, tick them and pick Actions → Reverse…. A reversing line is added, so the total nets to zero.
  3. Click Add cost to enter it again correctly.

Lines that came from a form are fixed by reopening the form and submitting it again.

To bill one day's labor at a different role (someone ran a machine or led the crew), click Labor, find the line, click Change labor role, pick the role in Bill and cost this time as, type Why and click Change role. The line must not be on an invoice yet.

See each project's profit and overhead

  1. Open Accounting → Projects and set the From and To dates.
  2. Search, or click a column such as Margin to sort.
  3. Click a project to read its Revenue, Cost, Gross profit, Labor hours, Invoiced to date and Unbilled, the Cost by code table and every line.
  4. Use Add cost on the project's page to enter something it is missing.
  5. Click the Internal accounts tab to see overhead by department. Click an account to see its lines. Overhead is cost only and is never billed.

Build the T&M Billing Summary

  1. Open Accounting → T&M Billing and pick the project.
  2. Set the From and To dates.
  3. Check each section and the totals: materials, rentals, equipment, labor, premium labor, subcontractors, profit and overhead, bond and sales tax. Cost anything the notice says is not costed yet.
  4. Click Print / PDF to print it on your letterhead for the customer, or CSV to download it.

Turn T&M work into an invoice

  1. On T&M Billing, pick the project and dates and check This period, not yet invoiced.
  2. Click Create invoice and confirm. A draft invoice opens in the side panel. Every line it bills is linked to it, so nothing is billed twice.
  3. Click Edit to set the invoice date, due date, Customer PO and notes, then click Save.
  4. Click Issue and confirm.

Bill progress on a contract project

  1. On Invoices, click New progress invoice and pick the contract project (or click Create progress invoice on T&M Billing).
  2. Type Bill this period, or a percent in or % of contract. Check Retainage %.
  3. Set the Invoice date, Period from and to, and Notes.
  4. Click Create draft, then Issue in the side panel.

Bill monthly maintenance contracts

  1. On Invoices, click Bill service contracts and pick the Month of service.
  2. Contracts that are due are ticked. Untick any to hold back; the others say why they aren't due.
  3. Click Create drafts, then review and issue the drafts.

To make them each month automatically, tick Service contracts: make each month's draft invoices automatically in Preferences and set the day.

Review, issue or void invoices

  1. Open Accounting → Invoices. Click the Drafts tile to see drafts.
  2. Click an invoice, or its eye (Open invoice), to open it in the side panel.
  3. Click Issue and confirm. For several drafts, tick them and pick Actions → Issue….
  4. An issued invoice is locked. To correct one, click Void and confirm, then create it again. Its lines are freed to bill again.
  5. Open the Unbilled tab to see work not on an invoice yet, project by project.

Export invoices to QuickBooks Online

  1. On Invoices, click Export to QuickBooks….
  2. Set Invoice date from and to. Every issued invoice in that range that isn't exported yet goes in the file.
  3. Leave File on CSV — QuickBooks Online import (or pick JSON — for an API connector) and click Export. The invoices are marked Exported.
  4. In QuickBooks Online, go to Settings → Import data → Invoices, upload the file, check the column mapping and import.
  5. If QuickBooks numbered an invoice differently, type it in QuickBooks invoice # on the invoice and click Save. QuickBooks CSV again on an invoice downloads it again without changing anything.

Payments are recorded in QuickBooks. Accounting does not know when an invoice is paid; past due means past its due date.

See hours by person, crew or project

  1. In the module that lists crews, people or projects, click ◷ Hours. The hours page opens in the side panel, with no dollars unless you may see them.
  2. Pick By project, By employee or By day.
  3. Pick This week, This month, Last month or Custom.
  4. Click a row to drill down from project to person to day to the form. Back returns.

Crew leads look up what time bills at on Accounting → Bill rates. Type in Search labor role or trade… to find a role.

Set up rates, codes, surcharges and overhead accounts

All of these are in Module Settings → Accounting → Configuration.

  1. Labor rates: click New rate sheet. In For, pick Everyone (standard rates), One customer (negotiated) or One project (negotiated), and set Effective from. Use Copy the rates of another sheet Adjusted by % to start from existing rates. Type the rates and click Save rates. Adjust % moves a whole sheet.
  2. A line is priced from the project's own sheet, else its customer's, else the standard sheet, in effect on the work date. Changing a rate never changes lines already posted.
  3. Cost codes: click Add cost code, type the Code and Name, pick the Category, type the QuickBooks name and click Save.
  4. Surcharges: Fuel and Card fee rules come with the module, turned off. Click Add surcharge (or the pencil on a rule), type the Name and Percent, pick Posted under and Treated as, tick the kinds of lines it applies to, set Status to On and click Save.
  5. Internal accounts: click Add internal account, type the Name, Code and Department, pick the Type, type the QuickBooks account and click Save.

Build the Office and Management dashboards

  1. On the Dashboard, click Build dashboards (confirm Rebuild dashboards if they exist already).
  2. Open Dashboards in the sidebar and pick Office or Management. Each person sees only the charts their permissions allow. See Dashboard.

For a printable report, open Reports under Accounting and click Job cost by project: each project's cost, labor, billable and not-yet-invoiced against its contract, with gross profit.

Who can do what

Each action in the module needs a permission. A Workspace Admin gives permissions to roles; see Users and roles: create and edit roles. Out of the box shows the module's starting roles that have it.

PermissionWhat it lets someone doOut of the box
View hours and quantitiesOpen the Dashboard, Transactions and hours pages and see everyone's hours and quantities, with no dollar amounts.Admin, Operator
View their crews' hoursSee hours (no dollars) only for the people they lead, by project. Needs the Team service preference set.Admin
View costs, rates and profitSee all dollars: labor cost and wages, rates, receipts, project profit and margins, T&M billing and invoices, and build dashboards. Give with care.Admin
View billing rates onlySee what each role's time bills at (standard, overtime, in-scope premium), never wages, cost or margins.Admin
Enter receipts and billsAdd receipts, rentals and vendor or subcontractor invoices against jobs, cost posted materials, and attach receipts.Admin
Create and send invoicesCreate, edit, issue, void and export invoices to QuickBooks, including progress and service-contract invoices. Give with care.Admin
Set up accountingMaintain cost codes, labor roles, rate sheets, multipliers, surcharges, internal accounts and preferences, and reverse or re-role ledger lines. Give with care.Admin
See the job cost reportRun the Job cost by project report (dollars), normally given together with View costs, rates and profit.Admin
  • Projects, T&M Billing and Invoices open only with View costs, rates and profit. Without it, people see the Dashboard and Transactions with hours and quantities only.
  • Reverse and Change labor role need Set up accounting, not Enter receipts and bills.
  • Give View their crews' hours and View billing rates only to your crew-lead role yourself; out of the box only Admin has them.

Ask its agent

The Accounting Assistant answers how-to questions from the module's help and works with your ledger, billing and invoices, with your own permissions. Try:

  • "What's unbilled right now, by project?"
  • "Which invoices are past due?"
  • "Show this month's P&L for our biggest project."

It can also add a cost, enter a vendor invoice or create a draft invoice. It tells you what it is about to do and waits for your yes; reversing a line or voiding an invoice also asks for approval in the app. It can't attach a receipt file, so use Add cost for that. See Agent chat.

Good to know

  • Nothing is ever edited or deleted. A reversal, or a form that is reopened and submitted again, adds offsetting lines.
  • Changing a rate or a preference applies from then on. Lines and invoices already made keep their amounts.
  • Internal accounts are cost only: never billable and never invoiced.
  • Every line an invoice bills is linked to it, so the same work can't be billed twice.
  • Accounting has no live link to QuickBooks. It exports a file, and payments are recorded in QuickBooks.
  • Leave the Sales tax preference at 0 if QuickBooks works out the tax, or it is counted twice.
  • Each cost code's QuickBooks name must match a product or service in QuickBooks exactly, or the import stops.

More help

Open Help at the top of any Accounting page for the full reference, including how labor gets its dollars and what each preference does. Its Runbooks walk through each job step by step, from checking what the dailies posted to the month-end review. See Find and follow a runbook. Accounting works with Inspections & Forms and the DV Field app for crews' forms, with your project module for projects and customers, and with HR and the Price Book & Vendors module when you use them.

Can't find what you need? Contact support.