# Bridges

Install the Bridge Harness on a Windows PC, then install, update or remove the Bridge Connectors your modules need.

Some modules need to reach things on your own network: a machine on the shop floor, a file share, a program on a PC. The **Bridge Harness** is the one Data Visions program you install on a Windows PC to make that possible. Once it's there, it installs and updates the **Bridge Connectors** your modules need, and you manage every PC from **Bridges**.

[Open Bridges now](/tenant/?open=settings/bridges)

## Set up a PC

1. Open **System settings**, then **Bridges**.
2. Click **Download Bridge Harness**.
3. Set **Number of PCs** and **Valid for (days)**, then click **Download setup file**.
4. Copy the file to the PC and double-click it there. It asks Windows for administrator rights, installs the harness for everyone on that PC and signs it in to your workspace.

The PC then appears under **Computers**. The setup file contains a sign-in, so delete it once you're done.

> **Setting up many PCs with an IT tool?** Click **Setup command instead** for a one-line command to run in PowerShell opened with **Run as administrator**. It's shown only once.

## Install, update or remove connectors

1. Click a PC's tile. **PC** connectors run for the whole computer; **People** connectors run for each person signed in there.
2. Click **Install**, **Update** or **Remove** next to a connector.
3. Choose how it happens:

| Option | What happens |
|---|---|
| **Install now** | Nobody at the PC is asked. |
| **Ask the person at the PC** | They can choose Later, up to the **Laters allowed**; then it installs anyway. |
| **Only if the person allows it** | Waits until someone at the PC says Yes. |

To remove a connector, type its name to confirm.

## Keep everything up to date

In the **Updates** box, tick **Update connectors automatically** and each PC updates itself on its next check-in. Or click **Update all behind**, or tick some PC tiles and use **Update selected**.

## Approve a bridge installed by hand

An older bridge installed without the harness signs in with a code. It shows under **Pending Approval**: give it a **Bridge name** and **Location**, then click **Approve** (or **Deny**). These bridges are listed under **Other bridges**, where **Remove** takes one off your workspace.

## Good to know

- **Only Workspace Admins** set up and manage PCs here.
- **Everyone** can see their own PCs in **My Profile**, **Profile settings**, **Bridge harness**, and sign in at the harness's taskbar icon to get their notifications on that PC.
- **A removed PC or bridge** that is still running can sign in again.
- **PCs another workspace set up** appear here when your people use them, with only your workspace's connectors.


Source: https://datavisions.ai/docs/system-settings/connections/bridges
